China Tungsten Carbide Plate manufacturer

Copper Based Binder Tungsten Carbide Rod For Severe Impact And Wear Application

Product Details:
Place of Origin: Zhuzhou,China
Brand Name: CHAOYU
Certification: ISO9001:2008
Model Number: 450mm length
Payment & Shipping Terms:
Minimum Order Quantity: 1 KG
Price: Negotiable
Packaging Details: Standard export carton
Delivery Time: 7-10 working days
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 10 tons per month
Contact Now

Detail Information

Item Name: Tungsten Carbide Composite Rod Carbide Particle: ¼”, 3/16”, 1/8”, And 1/16”
Content: Tungsten Carbide Particle And Matrix Alloy Application: Aggressive Cutting Or High Wear Applications And Smaller Particles For Other Various Applications.
High Light:

carbide drill rod

,

tungsten carbide drill bits

Product Description

Copper Based Binder Tungsten Carbide Composite Rod for Severe Impact and Wear Applications.

Tungsten Carbide Composite Rod

Composite rods consist of tungsten carbide particles suspended in a copper based binder for severe impact and wear applications. Tungsten carbide particles are typically ¼”, 3/16”, 1/8”, and 1/16” for aggressive cutting or high wear applications and smaller particles for other various applications.

  • Reamers
  • Auger bits
  • Auger flights
  • Wear pads
  • Earth moving and drilling
  • Trenching
  • Agricultural
  • Farrier applications
Copper Based Binder Tungsten Carbide Rod For Severe Impact And Wear Application
Property
Carbide content: 65%,75%
Hardness Carbide
(HRA): ≥89.5
Matrix alloy melting range: 890-910°C
Composite rod size:
Length: 280mm,350mm,450 mm,450mm
Diamter: 12mm,12mm,16mm,22mm
 
carbide partical size mm
1
1,6 – 3,2 mm
2
3,2 – 4,8 mm
3 4.8 – 6.35mm
4 6.35 – 8.0 mm
5 8.0  – 11.0 mm

 

 

The application of The composite Rods as follows:

Reamers

Hole Openers

Fishing Tools

Milling Tools

Coring Tools

Stabilizers

Screw Feeders

Slurry Paddles

Construction Drilling

Foundry Sand Mixing

General abrasive wear prevention, e. working part of Heavy Duty machines, such as Grader Blades, Dozer Blades, buckets, etcCopper Based Binder Tungsten Carbide Rod For Severe Impact And Wear Application

 
APPLICATION process
1) Thoroughly clean the base metal.
2) Lightly heat base material then apply flux. A little heat before applying powdered flux helps it stick to the base material, as the torch has a tendency to blow the flux away.
3) Gently heat the base material to melt flux, observe its coverage and correct any bare spots.
4) Applying a coating of Tungchip Tinning Rod can assist in the adhesion of the Composite Rod to the base material. The tinning rod can also be used to fill voids and give a smooth appearance if required.
5) Heat base material until it just begins to turn red. At this point begin applying rod to base material. The Tungchip Tinning Rod should flow onto the base material. If the Tungchip Tinning Rod balls up, it is not hot enough. Adversely, if the Tungchip Tinning Rod runs across the base material it is too hot. Care must be taken to maintain the proper temperature of the base material during application.
6) Composite Rod is sluggish and does not flow easily. How it flows can vary considerably, depending on the size and percentage of the Tungchip Tungsten Carbide Grit in the rod. Explanation of the exact technique for application is difficult but certain general advice can be given. Work slowly and gently with as little heat as possible. Allow the Composite Rod to precede the torch rather than follow it. If necessary use the rod as a pushing, packing and smoothing tool while applying just enough heat to melt the matrix. It would probably be beneficial for the beginner to practice on a scrap piece of steel before tackling the actual parts to be hardfaced. With practice good coatings can easily be made.
 
Package and delivery
 
Copper Based Binder Tungsten Carbide Rod For Severe Impact And Wear Application

Copper Based Binder Tungsten Carbide Rod For Severe Impact And Wear Application

Contact information

 

Copper Based Binder Tungsten Carbide Rod For Severe Impact And Wear Application

 
 

Get in touch with us

Enter Your Message

You Might Be Into These